碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

镍修饰WO3膜光电化学氧化水的研究

在强碱性溶液中低电压低电流条件下在W基底上经阳极氧化得到致密WO3层,而后在酸性条件下在WO3表面经光辅助电化学还原沉积镍,所获得的复合电极具有优异的光电化学氧化水的活性和稳定性.SEM,EDX,XPS和TEM等表征表明复合电极中具有体心立方结构的W基底经阳极氧化形成了具有单斜结构的WO3层,表面修饰的镍物种以Ni(OH)2形式存在.光电化学实验表明WO3层对可见光具有良好的光响应,表面修饰镍后,光电氧化水的起始电位显著降低,电极的稳定性也得以提高.     

About the Reaction of C(PPh3)2 with [M(CO)6] (M = Cr,Mo): Unusual Formation of μ-Carbonato Complexes of Mo under Participation of THF

Attempts to synthesize complexes of group 6 carbonyl compounds [M(CO)₆] (M = Cr, Mo, W) with the carbone C(PPh₃)₂ ( 1 ) via the photo chemically created adducts [(CO)₅M(THF)] lead to quantitative formation of the salts [HC(PPh₃)₂]₂[M₂(CO)₁₀] ( 2 , Cr; 3 , Mo; 4 , W). Alternatively, a long-time thermal reaction of [Mo(CO)₆] performed with 1 in THF generates a series of products initiated by a Wittig-type reaction. In addition to 3 , minor amounts of [(CO)₅MoCCPPh₃] ( 8 ), [(CO)₅MoO₂CC{PPh₃}₂] ( 5 ), and the carbonate complexes [HC(PPh₃)₂]₂[(CO)₅Mo(CO₃)Mo(CO)₄] ( 6 ) and [HC(PPh₃)₂]₂[(CO)₄Mo(CO₃)Mo(CO)₄] ( 7 ) were found. Compounds 2 , 3 , 5 , 6 , and 7 were characterized by X-ray analyses, ³¹P NMR, and IR spectroscopy. The water, necessary for the formation of the carbonate, stems from decomposition of THF.     

Recent Advances in Facile Liquid Phase Epoxidation of Light Olefins over Heterogeneous Molybdenum Catalysts

Molybdenum complexes are versatile and efficient for liquid phase olefin epoxidation reactions. Rational design of catalysts is critical to achieve high atom efficiency during epoxidation processes. Although liquid phase epoxidation has been a popular topic for decades, three key issues, (a) rational control of morphology of molybdenum nanoparticles, (b) manipulating metal‐support interaction and (c) altering electronic configuration at molybdenum center remains unsolved in this area. Therefore, in this paper, we have critically revised recent research progress on heterogeneous molybdenum catalysts for facile liquid phase olefin epoxidation in terms of catalyst synthesis, surface characterization, catalytic performance and structure‐function relationship. Furthermore, plausible reaction mechanisms will be systematically discussed with the aim to provide insights into fundamental understanding on novel epoxidation chemistry.     

The effect of low levels of dopants upon the formation and properties of beta-phase molybdenum nitride

The addition of 1 wt% Pd, Au, Ni and Cu dopants has been demonstrated to strongly alter the morphology of beta-phase molybdenum nitride prepared by treatment of MoO₃ with a 3/1 H₂/N₂ mixture at 750 °C. Furthermore, the addition of Pd significantly enhances the surface area and the formation of the nitride phase. It is proposed that the facile formation of molybdenum bronzes in this system is important in this respect. The dopants have also been observed to modify the denitridation characteristics of the beta-phase, with an overall reduction of the proportion of NH₃ formed upon using a 3/1 H₂/Ar mixture with respect to the undoped sample.     

The Semiquantitative Determination of Impurities in High-Purity Molybdenum Metal by Optical Emission Spectrography

Abstract

A method is reported for the determination of Ni, Co, Bi, Al, V, Ti, Cu, Si, Pb, Cr, Mg, Sn, and Fe in molybdenum metal by optical emission spectrography. The procedure consists of dissolving the metal in HNO₃ and HCl, evaporating to dryness, and igniting at 500–550°C to MoO₃. The MoO₃ is mixed with an equal weight of GeO₂, which acts as an inert collector, and ignited at 700–750°C to volatilize the MoO₃. This double ignition method concentrates the impurities on the GeO₂ thereby placing the trace elements within the range of the spectrograph. The residue is excited in a d c are at 10 amps and the spectra are recorded on a photographic emulsion.     

Alkyne oligomerization catalyzed by molybdenum(0) complexes

Three new molybdenum(0) complexes, [Mo(CO)₃(Hpz)₃] (1), [Mo(CO)₂(Hpz)₂(DMAD)₂] (2), (DMAD=dimethyl acetylenedicarboxylate) and [Mo(CO)₃(1-Me-imidazole)₃] (3) were synthesized and characterized. Their activity and selectivity in alkyne cyclotrimerization and co-trimerization reactions was investigated. The molecular structures of 1 and 2 have been determined by unconventional powder and standard single-crystal diffraction methods, respectively. 1 consists of a pseudo-octahedral complex of C₃ symmetry, with the ligands in fac disposition; complex 2, of idealized C₂ symmetry, is obtained by substitution of one CO and one pyrazole in 1 by two DMAD ligands, and shows the rare trans configuration of π-bound acetylenic moieties.     

Hydrogen adsorption on Mo1−xRex(110) (x=0–0.25) surfaces

The effects of adsorbed H on the Mo_1−xRe_x(110), x=0, 0.05, 0.15, and 0.25, surfaces have been investigated using low-energy electron diffraction (LEED) and high-resolution electron energy loss spectroscopy (HREELS). For the x=0.15 alloy only, a c(2×2) LEED pattern is observed at a coverage Θ0.25 ML. A (2×2) pattern is observed for H coverages around Θ0.5 ML from surfaces with x=0, 0.05, and 0.15. Both c(2×2) and (2×2) patterns are attributed to reconstruction of the substrate. At higher coverages, a (1×1) pattern is observed. For the alloy surface with x=0.25, only a (1×1) pattern is obtained for all H coverages. Two H vibrations are observed in HREELS spectra for all Re concentrations, which shift to higher energies at intermediate coverages. Both peaks exhibit an isotopic shift, confirming their assignment to hydrogen. For Re concentrations of x=0.15 and higher, a third HREELS peak appears at 50 meV as H (D) coverage approaches saturation. This peak does not shift in energy with isotopic substitution, yet cannot be explained by contamination. The intrinsic width of the loss peaks depends on the Re concentration in the surface region and becomes broader with increasing x. This broadening can be attributed to surface inhomogeneity, but may also reflect increased delocalization of the adsorbed hydrogen atom.     

Synthesis and structural characterization of Ba(Ln2/3B1/3)O3 (Ln=Dy, Gd and Sm; B=Mo or W) complex perovskites

We describe in this work the synthesis and crystal structure of five rare earth and Mo(VI) or W(VI) containing complex perovskites. The compounds studied are Ba(Dy_2/3Mo_1/3)O₃, Ba(Dy_2/3W_1/3)O₃, Ba(Gd_2/3Mo_1/3)O₃, Ba(Gd_2/3W_1/3)O₃ and Ba(Sm_2/3W_1/3)O₃ and were prepared starting from solutions, by the polymeric precursors method. Structural characterization by HREM, SAED and powder XRD revealed the five compounds to be ordered cubic perovskites, SG Fm-3m (225), with a cell parameter double of that of a simple perovskite cell and increasing as the size of the trivalent lanthanide ion increases (Dy<Gd<Sm).     

Structural and optical characterization of DC magnetron sputtered molybdenum oxide films

Thin films of molybdenum trioxide were deposited on glass substrates employing direct current (DC) magnetron sputtering by sputtering of molybdenum at different oxygen partial pressures in the range 8 × 10⁻⁵–1 × 10⁻³ mbar and at a substrate temperature of 473 K. The glow discharge characteristics of magnetron cathode target of molybdenum were studied. The influence of oxygen partial pressure on the structural and optical properties of molybdenum trioxide films was investigated. The films formed at an optimum oxygen partial pressure of 2 × 10⁻⁴ mbar were polycrystalline in nature with orthorhombic α- phase and an optical band gap of 3.16 eV. The refractive index of the films formed at an oxygen partial pressure of 2 × 10⁻⁴ mbar decreased from 2.08 to 1.89 with increase of wavelength from 450 to 1,000 nm, respectively. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.